Cull a card on your iPhone or iPad
Open a memory card, drive or folder on your iPhone or iPad, cull it, and find your picks saved in XMP sidecars next to each RAW.
After a shoot, the card usually waits in the bag until you are back at a computer. With Remote Cull you can open it on your iPhone or iPad and start culling straight away, with no studio app and no computer. The app reads the files where they are, so your RAW files never leave your machine, and every decision is saved to XMP next to the photo.
What you need
- An iPhone or iPad with the app installed.
- A card reader that fits your device, or a drive, or a folder in the Files app. The same steps work for all of them.
Open the card
iOS does not let an app see a card until you point the app at it, so the first step is choosing it once.
- Plug in the card reader with the card in it.
- On the first screen, tap Open a folder. Later on, open the folders panel and tap Open a folder… under This iPhone (or This iPad).
- The system’s Files picker opens. Choose the card, or any folder on it. A drive or a folder on the device works the same way.
- The first time, the app shows the card’s name and tells you that ratings are saved beside each photo as
.xmpfiles. Tap Open.
A whole card opens as one grid, with every camera folder on it (100MSDCF, 101MSDCF and so on) included. The card then stays listed under This iPhone or This iPad, so next time you can open it from there.
If the card is locked or read-only, the app says so before it opens: your ratings stay on the device until the card can be written.
Grid, loupe and Focus
The toolbar switches between three views:
- Grid shows the whole card. Tap a photo to open it.
- Loupe shows one photo. Swipe to move to the next or previous one, and pinch to zoom in on eyes and focus.
- Focus fills the screen with the photo and hides the toolbar, for when you only want to look.
Frames open quickly because the app shows the full-size preview the camera embedded in each RAW, rather than developing the RAW itself, and it reads ahead so the next frames are ready. The info button on the photo cycles between the file name, a line with aperture, shutter speed, ISO and focal length, and more detail.
Pick, reject, stars and colour labels
By default, a see-through row sits along the bottom of the photo: Reject, five stars, and Pick.
- Tap a star to set the rating. Tap the same star again to clear it.
- Tap Pick or Reject to set it, and tap it again to take it off.
Colour labels (red, yellow, green, blue, purple) are set through tap zones: switch your cull controls to tap zones in Settings and give a zone a colour. The one-handed culling post walks through that set-up.
One rule to know: a frame holds either a pick or reject, or a colour label, plus its stars. Setting a colour on a picked frame replaces the pick. This is because both are stored in the same XMP field (more on that below).
To mark many frames at once, tap Select in the toolbar (or hold a photo in the grid), choose the frames, then use the ⋯ menu for Pick, Reject, a star rating, or Clear rating and flag.
Filter what you see
A card from a wedding is a lot of frames. The Filter button narrows the grid so each pass only shows what it needs to:
- All, picks (✓), rejects (✗), each star rating, and each colour label. Choose several and the grid shows frames that match any of them.
- File type, when the card holds more than one kind of file.
- Camera, when the frames come from more than one body. Handy when a second shooter’s card is in the same folder.
The search field narrows the grid by file name.
Where your picks are saved
Each decision is written to an XMP sidecar next to the photo, with the same name: DSC00001.ARW gets DSC00001.xmp. The app writes two fields only, xmp:Rating for stars and xmp:Label for the label, and leaves the rest of the sidecar untouched. If a frame already has a sidecar, the app shows its stars and label and keeps everything else in it.
The label is plain text:
- a pick is written as
Pick - a reject as
Rejected - a colour label as its name, such as
Red
This is label text, not any editor’s own pick flag. Your editor will show it as a label, not as a flagged frame.
On iPhone and iPad, each sidecar is written to a temporary file first and then swapped in, so a sidecar is never left half-written. If the card is pulled while a rating is being saved, the app keeps that rating and writes it when the card is back.
DNG, JPEG and TIFF: the app writes a .xmp sidecar for these too, but some editors read metadata inside these files and ignore the sidecar. Lightroom Classic is one of them. Until we have tested each format and editor, check that your editor picks up your ratings on a few frames before you rely on it.
What to do next in your editor
- Copy the card to your drive. The copy takes every file on the card, so the
.xmpsidecars go with the RAWs. If you plan to copy the card anyway, you can also copy first and cull the copy instead. The Copy cards safely guide covers both. - Open or import the folder in any editor that reads XMP sidecars.
- Filter there by stars, by the label text
Pick, or by colour label, and edit from your picks.
Your editor does the RAW development. Remote Cull only decides which frames are worth it.